Once the 3 screws are out you should be able to screw a 7/16" bolt into the threaded hole that is in the drum as the bolt turns through the hole. It will hit the end of drive shaft and break the seal. If you tap the drum with a hide mallet opposite to bolt it should break free.
Comments
1 comment
Once the 3 screws are out you should be able to screw a 7/16" bolt into the threaded hole that is in the drum as the bolt turns through the hole. It will hit the end of drive shaft and break the seal. If you tap the drum with a hide mallet opposite to bolt it should break free.
Article is closed for comments.