Flying Spares Help Centre
- Total activity 191
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 88
Comments
Recent activity by Flying Spares Help Centre-
Once the 3 screws are out you should be able to screw a 7/16" bolt into the threaded hole that is in the drum as the bolt turns through the hole. It will hit the end of drive shaft and break the se...
-
Cars prior to chassis number FA144 had oil fed suspension so the parts you require are:Top pin UR3797Top bush UR4266Lower pin UR3965 The parts are not interchangeable, although the later grease fed...
-
Good afternoon Our mechanic has suggested that it is very easy to get the Distributor 180 degrees out.He would suggest turning it around and trying it.It's still possible to be 180 out. The best wa...
-
Good MorningThe below response is from John in our technical department, I hope this helps answer your question.The oil for the dampers is Castrol TQ, the seals are quite easy to replace, but the d...
-
The Engine number on this car is on the block just below the cylinder head.Many thanks
-
All R Types had 11 inch clutch and flywheel assemblies
-
Hello, the part you will need is a UD70565. Please contact our sale team to confirm availability.Many thanks.
-
235/70/15 Avon Turbosteel Tyres will fit to your car. They will just look a little wider than the standard ones and you may get a little bit of scrubbing on full lock but this doesn't happen on all...
-
On the tyre valves we have been told that most tyre fitters can supply these when fitting your tyres.They are a different size but most places are okay and can supply them.Many thanks
-
Good Afternoon If you look under the car they are next to the power steering coolerThere are 2 horns there.Hope this has helped