Flying Spares Help Centre
- Total activity 191
- Last activity
- Member since
- Following 0 users
- Followed by 0 users
- Votes 0
- Subscriptions 88
Comments
Recent activity by Flying Spares Help Centre-
Good Morning SirI Have spoken to one of our mechanics. And this is what he has recommended.Check all suspension bushings for damage/play, check dampers/hcv rams for leaks and over travel. also the ...
-
It could well be the shims if the canvas seat that they sit in has deteriorated
-
To be honest it could be coming from the rear hydraulic rams, rear springs, rear shocks, anti-roll bar, compliance cushions, main subframe mounts.......even the rear calipers or the jack in the boo...
-
Hey folks,I worked it out, through deciphering the over floral language in the original workshop manual. Here in layman's terms.1) Remove the two 7/16 Hydraulic Hoses Unions at the top of the ram. ...
-
Good Morning Thank you for getting back to us on this.Glad that it was a relatively easy fix in the end.Many thanks
-
No problem please keep us informed.
-
My first thought on this would be warped discs, are the brakes staying on at all?By this i mean are they making a scraping noise or sound as if they are slightly catching when moving slowly.On this...
-
This would normally be down to warped front discs
-
Hello SirIf the temperature gauge is not working, try a new sender unit.If the time on the clock is not working, check feed and the fuses to it.
-
The cylinder compression readings on the V8 engine of 8.1 compression should be between 110-130 psi with the higher reading for a new/rebuilt engine and with minimal fluctuation between cylinders.Y...